Aluminum Thermal-Break Fixed Windows

General:

Fixed glass windows shall be manufactured by Glass Rite, 808 Gibson SE, Albuquerque, NM 87102. Sizes and types as specified on plans. The windows comply with AAMA/NWWDA 101-I.S.2-97 specifications for F C-60 designation.

Material:

Main frame and panel members shall be of aluminum extruded alloy 6063-T5. All frame and panel members shall be thermally insulated with a thermal break polyurethane compound chemically and mechanically bonded to the divided aluminum extrusions.

Finish:

Frame and panel members shall be medium bronze or white. The electrostatically painted and baked enamel finish shall meet AAMA 603.8 specifications for pigmented organic finishes

Construction:

Main frame and panel members are machined and joined at corners by screws fastens into integral screw bosses. Frame corners to be sealed full perimeter.

Hardware:

Hardware shall be of aluminum, stainless steel, or other corrosion-resistant material.

Weatherstripping:

Weatherstrip shall be of only high quality materials proven to meet the environmental exposure and performance requirements. Weatherstrip shall conform to AAMA 701.

Glazing:

Windows shall be glazed with dual seal 1" insulated glass. Insulated glass to have Edgetech warm edge spacer as a secondary seal and a butyl primary seal. Glass shall be secured and sealed in panel by a channel type, soft vinyl gasket.